Pascal Roobrouck

Hi, thanks for your request. I looked into it and I think I have added the necessary code. Can you test, as I do not have a machine with coolant.....

Ok, tnx for your msg. I'll do a review and correct/improve if possible. P Op do 21 dec. 2017 om 19:32 schreef David the Swarfer < [email protected]> > Hi Strooom...

David, I am doing a new iteration of the Openbuilds postProcessor. Can you refresh my memory as to what you where missing and why you added xaOutput.. It seems having...

ok - take a look at my suggestions at the end of this thread https://github.com/Strooom/GRBL-Post-Processor/issues/17 >While GRBL docs say it does not mind if X or Y is missing from...

Could you share the fusion designs which consistently throw the error? It's easy to make a G/G3 always output all axis and offsets, but I think the error originates somewhere...

Yes, looks usefull, I will merge it. Thanks! P Op za 18 jan. 2020 om 20:45 schreef John Boiles > I also added the option to disable XY homing here...

Hello, Yes it is a known bug, It was introduced by another contributor and I missed it when doing the merge. In the mean time I know what causes the...

I think you are right, 4 digits should be ok. Let me look into this when I get home - currently enjoying a week of holidays in the mountains... P...

Hi Russ, thanks for your message. Indeed there seems to be some problems with error 33, although I have never had it myself. Several people have posted their opinion on...

Here is when GRBL decides to throw an error 33: _When the arc is projected on the selected plane, the distance from the current point to the center differs from...