Sfinx

upon configuring LED's kernel prints: ``` leds-gpio: probe of leds failed with error -16 ``` -16 means EBUSY. Removing shit makes LED's work again. tested at armbian_22.05.4_Nanopineo_jammy_current_5.15.48 ``` --- orig.dts...

Verbose mode gives this: ``` [+] Modifying packet in real time (total length 148) [+] IP: source 10.1.1.203 destination 10.1.1.242 tos 0 id 51870 [+] ICMP: code 9 type 8...

Seems like typo ``` diff --git a/osfooler_ng/osfooler_ng.py b/osfooler_ng/osfooler_ng.py index 000cee2..81ae46e 100644 --- a/osfooler_ng/osfooler_ng.py +++ b/osfooler_ng/osfooler_ng.py @@ -767,7 +767,7 @@ def cb_nmap( pl): print_icmp_packet(pl) pl.drop() if (base["IE"][0][0] != "R"): - send_icmp_response(payload,...

So new-folder option just exiting without any message or new folder created

@damon-kwok You have to read the: https://github.com/janten/dpt-rp1-py/blob/master/docs/linux-ethernet-over-usb.md It is connected dpt-rp1

> Hi, I have a DPT-RP1 from late 2017 or early 2018, I don't remember exactly, but definitely pre 2019. The device is updated to firmware version 1.6.50.14130. > >...

Same here, Desktop Ubuntu 20.04 (no touch there !) , Chrome 101.0.4951.64 (Official Build) (64-bit), Quasar v2.6.6

to reproduce - just issue several times the 'systemctl restart i2pd.service' and check the console - you will have the random status

The current git changed behavior in a much better way - ipv4 is nearly always 'ok' and do not jump in random status. ipv6 is in 'testing' nearly always.

ipv6 do not have the nat