Direction-of-Arrival-DoA-Estimation-Algorithm
Direction-of-Arrival-DoA-Estimation-Algorithm copied to clipboard
Navigine
Project for finding beacon location using Angle of Arrival (AoA) signal. The Direction of Arrival estimation is based on the MUltiple SIgnal Classification (MUSIC) algorithm here.
Hello! Your code is great! This is sufficient for DOA estimation of linear array. But I am currently studying the 2d-music algorithm of rectangular array. Have you started to study...
In your algorithm you use 2.48GHz frequency, however Minew also publish two additional frequencies - 2.402 GHz, 2.426 GHz. I've plugged them into your algorithm with improving wavelength calculations(lambda =...
Hello team, we have also using the same MineW AoA kit and followed your algorithm. Can you please share some tools used to calibrate the Locator and beacons. If the...
Hello, I'm using Minew Aoa Locator and I've experienced around 30seconds delay while listening on MQTT when moving tag. After unplugging antenna AoA data is published on MQTT for ~50seconds....
Здравствуйте, First of all, I want to congratulate you for the work you did here, it seems very interesting to me, but I have some questions about it: - How...
Just note. The effect you observed is likely caused by the phase shift added by your hand over the beacon. The effect you observed should probably be negligible if you...
Hi, thank for sharing this amazing project. 1. I would like to ask you about how you are able to get Azimuth and Elevation using antennas from horizontal and vertical...
