Andreas

Request rupport for NUCLEO-G491RE with STM32G491RE

3

Requesting support STMicroelectronics NUCLEO-G491RE STM32 Nucleo-64 development board with STM32G474RE MCU. -https://www.st.com/en/evaluation-tools/nucleo-g474re.html - https://www.st.com/en/microcontrollers-microprocessors/stm32g474re.html Almost same as NUCLEO-G474RE and NUCLEO-G431RB devlopment boards that [STSTM32](https://github.com/platformio/platform-ststm32) already supports with different MCUs: https://docs.platformio.org/en/latest/boards/ststm32/nucleo_g474re.html...

[REQUEST] Support for the new Sonoff RF Bridge 433

2

Request firmware support for the new Sonoff RF Bridge 433 https://www.itead.cc/sonoff-rf-bridge-433.html WiFi to 433MHz converter and vice versa to convert 433MHz RF sensors and remote to App via WiFi https://www.itead.cc/wiki/Sonoff_RF_Bridge_433...

[REQUEST] Support for the new Sonoff RF Bridge 433

1

Request firmware support for the new Sonoff RF Bridge 433 https://www.itead.cc/sonoff-rf-bridge-433.html WiFi to 433MHz converter and vice versa to convert 433MHz RF sensors and remote to App via WiFi https://www.itead.cc/wiki/Sonoff_RF_Bridge_433...

Same as zigpy/bellows#339 and zigpy/zigpy#475 as reported by @fabaff of Home Assistant / hass.io : Asynctest doesn't work with Python 3.8 and above. It's the same issue as for zigpy...

Can zigpy-cc support CC13x2 / CC1352P chips by Texas Instruments if use custom Z-Stack 3 based firmware from the Zigbee2mqtt project? CC13x2 / CC1352P chips are much faster and contain...

[REQUEST] Support for CC2538 / CC2538x chips with Z-Stack 3 firmware

1

Can zigpy-cc support CC2538 / CC2538x chips by Texas Instruments if use Z-Stack 3 based firmware? CC2538 (in combination with CC2592 amplifier) will reportedly be much better than CC2531 For...

@hackaday3D / @Eryone Can I suggest that you port Marlin firmware to run on the STM32MP1 MPU series? https://blog.st.com/stm32mp1-mpu-stm32mp157a-ev1-stm32mp157c-dk2/ STMicroelectronics claims its architecture enables developers to use the same software...

@hackaday3D Can I suggest that you port Marlin firmware to run the new STM32MP1 MPU series? https://blog.st.com/stm32mp1-mpu-stm32mp157a-ev1-stm32mp157c-dk2/ I am only an end-user / technology enthusiast myself and I do not...