Daniel Arroyo

Study using M73 for time estimates

1

A feature that I found very useful in OctoPrint was the ability to override the print time remaining if the GCODE had M73 print times embedded in it from the...

Lock focus on camera ( when supported )

1

https://forum.astroprint.com/t/focus-lock-on-logitech-c920/2083

The user should be able to define a position in the bed where the nozzle should move to before taking a photo for the timelapse.

Take Layer timelapse picture on a constant Y position

1

In order to have a consistent position for the head during the timelapse, the photo should be taken when the extruder is in a predictable position

Print Queue: Canceling a print job shouldn't remove the file from the queue

2

Canceling a print job should leave the item in the queue, in case the user wants to retry

Implement alternate connection sequence for Malyan M200 printers

1

The implementation details are the same as https://github.com/OctoPrint/OctoPrint-MalyanConnectionFix Printers affected are: MonoPrice Select Mini v2, Monoprice Mini Delta 3D, Fabrikator II mini

Add Proxy support

2

Add the ability to enter proxy URL and port in the network settings.

when the box is heating up. Incoming requests are not handled.

It seems that when an update is applied that has the "Force Setup" flag set, the daemon is not starting back up. Possibly it could be crashing before restart leaving...