Super-Simple-Raspberry-Pi-Audio-Receiver-Install

Super-Simple-Raspberry-Pi-Audio-Receiver-Install copied to clipboard

fix for volumio2 sub-shell sudo permission problems; smaller fixes

[{"_id":"6322bec3d7e37411a82fc31e","body":"Have any tests been run on this? @wullxz ","issue_id":1660115736658,"origin_id":418214559,"user_origin_id":13072194,"create_time":1536024172,"update_time":1536024172,"id":1663221443054,"updated_at":"2022-09-15T05:57:23.053000Z","created_at":"2022-09-15T05:57:23.053000Z"},{"_id":"6322bec3d7e37411a82fc31f","body":"Sorry, missed your answer here somehow. No, I haven't run any tests apart from testing it in my environment with the latest volumio version.\r\nWhat tests would you like to be run?","issue_id":1660115736658,"origin_id":426043728,"user_origin_id":813777,"create_time":1538424222,"update_time":1538424222,"id":1663221443062,"updated_at":"2022-09-15T05:57:23.062000Z","created_at":"2022-09-15T05:57:23.062000Z"}]

- add $user to sudoers before calling bt_pa_config.sh This ensures that $user can run sudo commands without typing any password. The error message, that previously was "swallowed" by `exc` was:...

wullxz

No local audio from RPI

[{"_id":"6322bf790d68a95f041b0130","body":"Hi, \r\n\r\nFrom what I've seen Pulseaudio is not launched automatically at boot, you can try to open a terminal and type `pulseaudio &`. ","issue_id":1660115736660,"origin_id":385477458,"user_origin_id":27226185,"create_time":1525110887,"update_time":1525110887,"id":1663221625190,"updated_at":"2022-09-15T06:00:25.189000Z","created_at":"2022-09-15T06:00:25.189000Z"},{"_id":"6322bf790d68a95f041b0132","body":"> Hi,\r\n> Playing audio on the RPI from my computer works well over Bluetooth, but I have not been able to play audio locally on the RPI after the installation. For instance there is no audio when starting a YouTube-video in the browser of Raspbian desktop.\r\n> \r\n> I'm probably missing something simple.\r\n> \r\n> **My setup**\r\n> \r\n> Raspberry PI 3 model B\r\n> JustBoom Amp HAT\r\n> Raspbian Stretch with desktop\r\n> \r\n> Best regards, Johan\r\n\r\nI've also encountered this. BT streaming works fine and i can control even the volume, but when i do \r\n\r\n`sudo aplay \/usr\/share\/sounds\/alsa\/front_center.wav` no sound comes through the speakers... \r\n\r\n@johans86 did you manage to find a solution ? \r\n\r\nFor me `sudo aplay \/usr\/share\/sounds\/alsa\/front_center.wav -D sysdefault ` plays music but at full volume and i can't control the volume in any way. :(","issue_id":1660115736660,"origin_id":425369721,"user_origin_id":43009054,"create_time":1538124942,"update_time":1538124942,"id":1663221625194,"updated_at":"2022-09-15T06:00:25.194000Z","created_at":"2022-09-15T06:00:25.194000Z"},{"_id":"6322bf790d68a95f041b0133","body":"I didn't find any stable solution that worked every time from what I can\nremember, and gave up on it. Would be great if it worked though!\n\nDen fre 28 sep. 2018 kl 10:55 skrev adrian-elian <[email protected]>:\n\n> Hi,\n> Playing audio on the RPI from my computer works well over Bluetooth, but I\n> have not been able to play audio locally on the RPI after the installation.\n> For instance there is no audio when starting a YouTube-video in the browser\n> of Raspbian desktop.\n>\n> I'm probably missing something simple.\n>\n> *My setup*\n>\n> Raspberry PI 3 model B\n> JustBoom Amp HAT\n> Raspbian Stretch with desktop\n>\n> Best regards, Johan\n>\n> I've also encountered this. BT streaming works fine and i can control even\n> the volume, but when i do\n>\n> sudo aplay \/usr\/share\/sounds\/alsa\/front_center.wav no sound comes through\n> the speakers...\n>\n> @johans86 <https:\/\/github.com\/johans86> did you manage to find a solution\n> ?\n>\n> For me sudo aplay \/usr\/share\/sounds\/alsa\/front_center.wav -D sysdefault\n> plays music but at full volume and i can't control the volume in any way. :(\n>\n> \u2014\n> You are receiving this because you were mentioned.\n> Reply to this email directly, view it on GitHub\n> <https:\/\/github.com\/BaReinhard\/Super-Simple-Raspberry-Pi-Audio-Receiver-Install\/issues\/125#issuecomment-425369721>,\n> or mute the thread\n> <https:\/\/github.com\/notifications\/unsubscribe-auth\/AAqJ8kgp4fxP9hiNxdDBPRjm25Ai1D1Nks5ufeQSgaJpZM4TniG_>\n> .\n>\n\n\n-- \n\nJohan Seijsing\nLustg\u00e5rdsgatan 5\n112 18 Stockholm\n\nCONFIDENTIALITY NOTICE: If you have received this message in error, please\nnotify the sender immediately by return email and delete this message from\nyour system. Thank you for your cooperation. This message and any attached\ndocuments may contain privileged and confidential information. If you are\nnot the intended recipient, be aware that any re-disclosure, copying,\ndistribution or use of the information by any other party is strictly\nprohibited.\n","issue_id":1660115736660,"origin_id":425386585,"user_origin_id":690674,"create_time":1538128706,"update_time":1538128706,"id":1663221625200,"updated_at":"2022-09-15T06:00:25.199000Z","created_at":"2022-09-15T06:00:25.199000Z"}]

Hi, Playing audio on the RPI from my computer works well over Bluetooth, but I have not been able to play audio locally on the RPI after the installation. For...

johans86

Cannot adjust volume with USB DAC

[]

I cannot adjust the volume via the webUI when I am using a USB DAC (Schiit Modi) as the output to my amplifier. This feature works fine when I output...

jdforest

Shorter URL

[]

Trying to type out that 'git clone' line was annoying me so I made it smaller. https://tinyurl.com/SSPARI can now be used instead, making the commands ``` pi@raspberrypi:~/ $ git clone...

uzlonewolf

[Error] I got /etc/pulse/system.pa' failed

[{"_id":"6322bbe5a6ecce368d5bc891","body":"I solved by re-install raspbian stretch. \"sudo patch\" isn't useful. You should find another method. Every installation is causing the fault.","issue_id":1660115736669,"origin_id":416683319,"user_origin_id":5773704,"create_time":1535479230,"update_time":1535479230,"id":1663220709757,"updated_at":"2022-09-15T05:45:09.757000Z","created_at":"2022-09-15T05:45:09.757000Z"}]

When i install program, i got this error message Cli Error: ``` SSRPARI [Tue 28 Aug 13:40:35 UTC 2018] Executing sudo patch /etc/pulse/system.pa Fatal error encountered: 'sudo patch /etc/pulse/system.pa' failed...

alpgul

Pulseaudio service starts before Bluetooth service on boot, causing it to timeout

[]

Running a Bluetooth only setup on a Raspberry Pi 2 B with hifiberry dac+. Using the latest Stretch image. When I boot the pi, it seems that the pulseaudio service...

LukeMcDonnell

volumio: set a password for bluetooth

[{"_id":"6322bd200d68a95f041b00b5","body":"Hi,\r\nThis would be greatly appreciated. Allowing everyone in the street, neightbourg, being able to connect to the volumio is not very cool. I'm still hesitant to use it because I don't want to be awaken during the night cuz my audio system will play music at maximum level....","issue_id":1660115736674,"origin_id":403302874,"user_origin_id":820496,"create_time":1531070823,"update_time":1531070823,"id":1663221024655,"updated_at":"2022-09-15T05:50:24.655000Z","created_at":"2022-09-15T05:50:24.655000Z"}]

Hey there, thanks for your great work. i managed it now, to get bluetooth working correctly thanks to your script (volumio, rapsberry 3b) there is just one improvement or a...

silelmot

Port installation scripts to ansible playbooks

[{"_id":"6322bf72a49e0e1da50a0e2d","body":"Something similar to this: \r\nhttps:\/\/github.com\/BaReinhard\/ansible_rpi\/pull\/4","issue_id":1660115736676,"origin_id":401521276,"user_origin_id":13072194,"create_time":1530340254,"update_time":1530340254,"id":1663221618974,"updated_at":"2022-09-15T06:00:18.974000Z","created_at":"2022-09-15T06:00:18.974000Z"},{"_id":"6322bf72a49e0e1da50a0e2e","body":"Current shairport-sync aka airplay has been ported. I will create a list of what is needed for feature parity. This will be a more consistent way of installation and easier to make make changes and maintain. \r\n","issue_id":1660115736676,"origin_id":401554738,"user_origin_id":13072194,"create_time":1530379372,"update_time":1530379372,"id":1663221618981,"updated_at":"2022-09-15T06:00:18.981000Z","created_at":"2022-09-15T06:00:18.981000Z"}]

Slowly move install scripts to ansible playbooks, more reliable and easier to run/configure. ## Porting for Feature Parity * ✅ ~~Shairport-Sync~~ Approved: https://github.com/BaReinhard/ansible_rpi/pull/4 * ❌ Pulse Audio Pending: https://github.com/BaReinhard/ansible_rpi/pull/5 *...

BaReinhard

Use wlan at home and Hotspot elsewhere

[{"_id":"6322bf0a0d68a95f041b011b","body":"Hey Markus, it would be possible, but currently I am working on Feature Parity as we transition the install to ansible, once we have feature parity I will begin working on future features as well.\r\n\r\nThe install should work either way, but I believe with the latest OS this feature has been broken. I haven't tested, but is one of the reasons we are moving to something less fragile such as ansible.","issue_id":1660115736678,"origin_id":401556209,"user_origin_id":13072194,"create_time":1530380970,"update_time":1530380970,"id":1663221514329,"updated_at":"2022-09-15T05:58:34.329000Z","created_at":"2022-09-15T05:58:34.329000Z"}]

Hi, I tried to install the AirPlay Receiver with the Access Point a few times but I can't see the Hotspot with any Device. Do I have to do the...

MKSounds

Fatal error encountered

[{"_id":"6322bf6fd7e37411a82fc343","body":"I'm experiencing the same issue. \r\n SSRPARI [Fri May 18 05:06:41 UTC 2018] Executing sudo cp usr\/local\/bin\/volume-watcher.py \/usr\/local\/bin\/volume-watcher.py\r\nFatal error encountered: 'sudo cp usr\/local\/bin\/volume-watcher.py \/usr\/local\/bin\/volume-watcher.py' failed\r\nFatal error encountered: su volumio -c .\/bt_pa_config.sh failed\r\n\r\nalso: \r\nwhen executing this command by hand, it works\r\nvolumio@volumio01:~\/super-simple-raspberry-pi-audio-receiver-install$ sudo cp usr\/local\/bin\/volume-watcher.py \/usr\/local\/bin\/volume-watcher.py\r\n\r\nso I've commented out the regarding line, but the install script failed at the next copy command. \r\nI repeated the steps for that, but the installer seems to failed on every subsequent cp. \r\n\r\nFatal error encountered: 'sudo cp init.d\/pulseaudio \/etc\/init.d\/pulseaudio' failed\r\n\r\nI'm using a raspberry pi 3 b+ \r\nuname -a\r\nLinux volumio01 4.14.29-v7+ #1101 SMP Thu Mar 22 17:27:30 GMT 2018 armv7l GNU\/Linux\r\n\r\n","issue_id":1660115736680,"origin_id":390099457,"user_origin_id":39397145,"create_time":1526621702,"update_time":1526621702,"id":1663221615776,"updated_at":"2022-09-15T06:00:15.775000Z","created_at":"2022-09-15T06:00:15.775000Z"},{"_id":"6322bf6fd7e37411a82fc345","body":"Hello all got the same issue - running Raspberry pi3 and Volume Image 29 \r\n\r\nFatal error encountered: 'sudo cp usr\/local\/bin\/volume-watcher.py \/usr\/local\/bin\/volume-watcher.py' failed\r\nFatal error encountered: su volumio -c .\/bt_pa_config.sh failed","issue_id":1660115736680,"origin_id":392504661,"user_origin_id":16336893,"create_time":1527507767,"update_time":1527507767,"id":1663221615792,"updated_at":"2022-09-15T06:00:15.791000Z","created_at":"2022-09-15T06:00:15.791000Z"},{"_id":"6322bf6fd7e37411a82fc346","body":"As reported in #103 : \r\n- edit bt_pa_config.sh with \"sudo nano\" and change every \"sudo\" command in \"sudo -S\";\r\n- delete \"exc\" tag before new \"sudo - S chmod XXX\" (where XXX are numbers of read-write permissions) and \"sudo - S patch\". Someone suggested to remove all, but in my case worked in this way\r\n- launch again installation with \"sudo .\/install.sh\"\r\n- at a certain point (when first \"sudo -S\" command is met installing \"volume-watcher.py\") it will stop and seems to freeze. You have to type in your password for new \"sudo -S\" command and ENTER\r\nI hope this will help you.","issue_id":1660115736680,"origin_id":396746954,"user_origin_id":38867519,"create_time":1528840418,"update_time":1528840418,"id":1663221615799,"updated_at":"2022-09-15T06:00:15.799000Z","created_at":"2022-09-15T06:00:15.799000Z"},{"_id":"6322bf6fd7e37411a82fc347","body":"Hey Guys, thanks for the interest in the project. Unfortunately, due to time constraints I am unable to address current issues and debugging, maintenance on the shell scripts are hard and inefficient. As such I will be porting over these scripts to ansible playbooks. This will allow for easier choosing of what you want installed, less brittle code base, and better maintenance so that less people experience the errors.\r\n\r\nOnce I have feature parity I will be addressing documentation on installing with ansible. The goal here is to allow people to setup multiple devices at once by only issuing one command, additionally to allow multiple OS support with less debugging and maintenance, as well as allowing other developers more easily add functionality to this repo with simple yaml files as opposed to obfuscated shell scripts.\r\n\r\nAny open issues I will keep open to allow other community members to help solve issues, but currently I don't have the time to do so. I apologize for the lack of support, but once feature parity with ansible is achieved I believe everyone will be happier and better off.\r\nThanks for understanding.\r\n\r\n","issue_id":1660115736680,"origin_id":401555589,"user_origin_id":13072194,"create_time":1530380269,"update_time":1530380269,"id":1663221615806,"updated_at":"2022-09-15T06:00:15.806000Z","created_at":"2022-09-15T06:00:15.806000Z"}]

Executing sudo cp usr/local/bin/volume-watcher.py /usr/local/bin/volume-watcher.py Fatal error encountered: 'sudo cp usr/local/bin/volume-watcher.py /usr/local/bin/volume-watcher.py' failed Fatal error encountered: su volumio -c ./bt_pa_config.sh failed

Marcookl