Ivan Riol

am trying so same thing and always something breaks....i thought i was right there with the guide from @jupiter8888 but not so fast, mine throws me AT+CECMMODE=1 ERROR

yea it seems the only way to get it working with a constant IP connection is to make sure use qmi with USB, the USB-TTL serial wont work.....mine its now...

> mine is headless > I'm wondering whether compiling the kernel again but somehow changing > #include "/home/pi/Downloads/linux/drivers/usb/serial/usb-wwan.h" > changing it so it creates wwan on tty/AMA0 instead? > I'm...

another option you can try if you absolutely have to use the ttyAMA0 serial port is to install a serial-to-wifi transparent bridge option, you might want to look at this...

> @jupiter8888 > > Thanks for the information. > my Pi zero is currently running the latest 4.19.97 as I only installed it a few days ago. it's the small...

@jupiter8888 so my wwan0 i know is the SIM modem because the mac address is that of the modem itself, and i do see an IP via AT commands only,...

@crazydiam0nd @jupiter8888 ill be dam....all the wasted time and installing this got it working in < 5min.....unbelievable....and with a GUI and all......am all set....hope works out for you guys too,...

@jupiter8888 @crazydiam0nd this is what it looks for me in a working state, using with zerotier now and its very reliable (ive scrambled my ether and IPs) enxb827e67f694f: flags=4099 mtu...

@jupiter8888 @crazydiam0nd notice my ethernet and wifi on the Pi are both unassigned, so as to they not be the default routes....zerotier interface (last one) is default route, havent tried...

> Updated from 1.24/stable (1.24.10) to 1.25/stable and running 1.25.5, the issue still persists as running `microk8s inspect` still gives me a > > ``` > WARNING: The memory cgroup...