Igor Freire

Hi @sv1bds , Thanks for your interest in the project. I'd recommend using the `dvbs2-rx` app instead of the hierarchical block, given the app has many options. I assume there...

Hi @sv1bds , apologies for the delay. I'm catching up with some pending issues now. Were you able to figure out how to use the blocks? If writing your own...

Hi @sv1bds , That's good progress. I can see the timing metric is not that much strong yet. Ideally, the timing metric goes up to 57 when the signal has...

Hi @sv1bds , You will only see the four constellation points after the frame sync stage, whose success is indicated by the `Locked: 1` frame_sync log. You haven't reached this...

Hi, @sv1bds . It seems like I can close this issue for now. Let me know if you need any further help, and feel free to reopen the issue if...

Hi @razed11 , > Can this be run without X11? Both the Tx and Rx application can be executed with and without a GUI. Both support the `--gui` option to...

@razed11 I had a chance to reproduce the GUI problem. The `Unable to init server: Could not connect: Connection refused` message was because the dvbs2-tx/rx apps were importing `gr.qtgui` even...

> Regarding --usrp-sync I get the same error but I took a more careful look at the code and USRP documentation and I think perhaps I did not communicate well....

> Also I verified that --usrp-sync none does appear to work properly. That's great. > I'm curious why "Center Frequency" is 1.0 GHz should this be the same as the...

Hi @razed11 , After a long delay, I'm catching up with some pending issues. > When I set --freq to my center frequency and run the GUI the widget shows...