ieol

Beware the SD card. Sometimes seems major problems comes from the SD card. Yesterday I got a failure printing a new project after 4 hours the print stop, the screen...

@derbroti a faulty or better a semi faulty or we should talk about a CRC RANDOM faulty SD card can lead at any kind of problem even a corruption of...

@andersolsson I see your comment now (posted 10 days ago) This is right what happened to my UM2 (the print head above the printing piece, all shut off except the...

@unixhelden so let resume you use an even more susceptible connection mode for transferring gcode? Really! seems right the correct way to test something new! And see if it is...

@gr5 there are no fact or the problem would already be solved... if you think that change in firmware is a simply upgrade you already write all... have a nice...

@unixhelden @Turtletrumpet LOL I never write 16.12.1 is flawless, I just point out the way you are all begging for a flawless firmware but just write down information that ARE...

Thanks for this fine Firmware! I tried to reproduce the issue above through the "MOVE" Menu, or through the "ADVANCED-->Move Material" Menu, but the problem doesn't comes out. No problem...