ianwestwood
ianwestwood
Hi Mitch, thank you for taking the time to look into this for me.... it is much appreciated. I have been playing with 3.7.2-pre3 and have some (hopefully helpful) observations,...
Incidentally, here is a picture of the completed rose polygon FYI: 
Agreed, that's why I numbered them! I'll bear that in mind for the future.
> Furthermore, G92 is not considered best practice anymore. Best practice is to set the offset from machine zero to work zero in the G54 (or G55 or ...) coordinate...
> I fixed the SD card problem yesterday. Let me know if you need someone to test! Happy to support you.
> Also it would be awesome if even a small fraction of the users sponsored the project. Ack
> A new release just dropped. https://github.com/bdring/FluidNC/releases/tag/v3.7.3 I'll give it a whirl today. Thanks for sharing.
Quick question if I may.... I ran install-wifi.bat, but it looks like wifi is turned off. Am I terrible at following instructions? Fluidterm says: > Grbl 3.7 [FluidNC v3.7.3 (wifi)...
Did some more learning (always appreciate that), and it looks like I get errors for anything $Sta related. For example: > Grbl 3.7 [FluidNC v3.7.3 (wifi) '$' for help] >...
Yes, I tried many wifi related commands, but they didn't work after running install-wifi.bat for 3.7.3. Should I be doing a complete erase and reinstall? I ran the following into...