Dmitry Murzinov

Thanks! Remained unclear point for me: FW-optimization for INT-signal from MCP2515 handle: I only need call mcp2515_update_status() from interrupt-handler instread polling mcp2515_update_status() from main-routine while-cycles? For what purposes for calling...

B50612D at least exists on chinese resources like https://download.csdn.net/download/mydream_sky/11088168 But I can't to download it.

@derekmulcahy indeed! Thanks for sharing and it seems google not so good indexing github

I have been similar issue: ``` $ rtl_power -f 88M:108M:125k fm_stations.csv $ ./heatmap.py fm_stations.csv fm_stations.png $ file fm_stations.png fm_stations.png: PNG image data, 257 x 86, 8-bit/color RGB, non-interlaced ``` why...

Thanks for your suggestion. I think mixing different buses into one page might complicated to search and worsens the structuring of information. Would be great to have different lists for...

First of all thank you for building OpenCL compiler up to RPi3. Also can’t wait to see OpenCL support on the RaspberryPi 4. May it helps https://www.raspberrypi.com/news/vulkan-update-version-1-1-conformance-for-raspberry-pi-4/ ?

I tryed build the original version from github for STM32F042C6, after flashing I saw the same symptoms - no answer by COM-port from/to host. Perhaps the issue in GNU toolchain....

Sounds great! Host-to-FPGA AXI stream transfer almost the same as AXI MM in BURST mode Please allow me to share some trivial ideas for FPGA-to-Host implementation on FPGA side: 1....

да, монитор подключен по HDMI в настольных экспериментах, в перспективе переход на DPI (RGB18). проблема заключается не в том, что нет картинки, а в этом варнинге - т.е. при запуске...

Ок. Вот формулировка на русском языке: почему в зависимостях (файл requirements.txt) указана версия python-can: `python-can==3.1.1` а по факту через apt-get доступна только 1.5.2-3 ? PS: на какой ветке питона рекомендуете...