Dominic Clifton

Using SYSTICK and CYCCNT would be fine for many CPUs, just gate it's availability. One of the issues I have is that I need *ALL* the timers on an H7,...

This might need rebasing now that https://github.com/embassy-rs/embassy/pull/792 is merged as it uses a `Signal`.

Likely the problem is in the libusb1-sys crate, but this project seems to use `0.5.0` but the latest version is 0.6.2: https://docs.rs/libusb1-sys/0.6.2/libusb1_sys/index.html https://github.com/a1ien/rusb/tree/master/libusb1-sys

I noticed that some of my cygwin packages were out of date, I upgraded them all and retried with the same result I also tried building the latest version of...

Perhaps anyone reading this could add a +1 command or vote to the issue I raised (https://github.com/a1ien/rusb/issues/136) so that a little extra pressure is applied to the maintainers of the...

yeah. :( When it happens again I can try and get more details from the running system. Can you think of anything that would be useful to look at?

It happened again:    rx task for reference values:  ``` # status MCU H730 Clock=520MHz, Vref=3.28V, Core temp=58degC Stack size: 2048, Stack address: 0x2000f000 Configuration: CONFIGURED, size:...

@SteveCEvans Did you test with `set osd_framerate_hz = 60`?

It seems quite consistent here, I set a stopwatch for 70 minutes, monitored it, and at 71 minutes it stalled again. 0xffffffff = 4294967295 / 1000 / 1000 = 4294...

I was getting the failure after just 71 minutes earlier today, the 4 hour test yesterday may have been 71 minutes too, except that I didn't check it till 4...