hurr1k4ne

Thanks for your reply. the VM was only for testing easyness ;-) Yes we are interested in a solution. We refresh our network and adding VLAN segments. Our firewall is...

Currently i added virtual nics to the VM and assigned a "virtual" Port-based VLAN tagging. As linux is capable it would be an option to use one NIC with linux...

okay, thank you very much. i am thinking about using a opnsense machine for this in the meantime. but it is way overkill for just DHCP/DNS...

Yes i can give IT a try. But need some time due to other workload. And i have to Setup some Lab Segments in our Network to Not kill production...

Here is my use case: I have about 40~50 invoices of my physiotherapist. I can send them to my health insurance to get some money back. The Problem is now,...

Fantastic and a quick job again! Thank you guys. I will have time at the weekend to give it a brief test. Will post results.

i did some tests the last days. I do have problems with the probe pin changing logic or being always "true" after some quick toggles. I tried different physical setups...

another test, i got {in5:n} always reporting true. then i disconnected the touchplate and connected a bare wire between pin and GND. But {in5:n} is still "true" then bare wire...

Sorry for the long delay, a quick update from me. I disassembled my whole cnc setup because i got huge problems calibrating the motors (bad running, lost steps, squeeking, no...

Hey alden, i reassembled my CNC now. 1) i use a brand new genuine Arduino Due - same behaviour, shutdown after some probing - tried different input also 2) di5mo...