operating-system icon indicating copy to clipboard operation
operating-system copied to clipboard

:beginner: Home Assistant Operating System

Results 274 operating-system issues
Sort by recently updated
recently updated
newest added

### Describe the issue you are experiencing I have the issue that since 12.0 my Homeassistant doesnt shutdown when I use shutdown procedure. It simply reboots! in 11.5 this shutdown...

bug
board/generic-x86-64
stable-kernel-regression

### Describe the issue you are experiencing As per the detailed description included in the list of steps to follow to reproduce the problem, although I entered the correct parameters...

bug

### Describe the issue you are experiencing I copied it from another issue: > * Exact RPi model (for 3B please distinguish between 3B and 3B+). i7-7700T HA OS in...

bug

### Describe the issue you are experiencing After upgrading to 12.3 my HA started bootlooping. Noticed that after I disconnected my Aeotec Z-Stick ZW090 it booted again and ran fine...

bug
board/raspberrypi

### Describe the issue you are experiencing HAOS does not reconnect to network after router reboot. DHCP used. Changed to static IP vid address reservation in the router. ### What...

bug
board/generic-x86-64
stable-kernel-regression

### Describe the issue you are experiencing I have a Raspberry Pi 3B and a 3B+ Using both Raspberry Pi Imager and Balena Etcher: The 3B can boot HAOS, Octoprint,...

bug
board/raspberrypi

### Describe the issue you are experiencing i have since last days after update this error brcmfmac: brcmf_set_channel: set chanspec 0xd0...fail, reason -52 may be the same i see here...

bug
board/raspberrypi

### Describe the issue you are experiencing After upgrade to 12.3 my Home Assistant SkyConnect/ZHA is no longer working. I've tried every possible reboot and restore from backup combination possible,...

bug
board/raspberrypi

### Describe the issue you are experiencing When I try to install the upgrade from v. 12.2 to 12.3, it attempts to boot from slot A three times, after which...

bug
board/generic-x86-64
stale
stable-kernel-regression

**Fresh install** on a Lenovo M90n-IoT with an i3, 4gb ram and a 128gb low-performance NVMe SSD. Computer had windows before on the drive. Booted Ubuntu Live, and used Disk...