RPI5 Ethernet port LEDs not turned off

[hollow-frenk]

Describe the issue you are experiencing

As per the detailed description included in the list of steps to follow to reproduce the problem, although I entered the correct parameters in the config.txt file the leds do not turn off.

What operating system image do you use?

rpi5-64 (Raspberry Pi 5 64-bit OS)

What version of Home Assistant Operating System is installed?

6.1.73-haos-raspi

Did you upgrade the Operating System.

Yes

Steps to reproduce the issue

1. Type login in the home assistant shell then press enter
2. Type vi /mnt/boot/config.txt then press enter
3. Edit the file by entering
   dtparam=eth_led0=4<br>dtparam=eth_led1=4
4. Save your changes and restart the system
5. The LEDs on the Ethernet port should be turned off but they are not. ...

Anything in the Supervisor logs that might be useful for us?

No

Anything in the Host logs that might be useful for us?

No

System information

System Information

version	core-2024.4.4
installation_type	Home Assistant OS
dev	false
hassio	true
docker	true
user	root
virtualenv	false
python_version	3.12.2
os_name	Linux
os_version	6.1.73-haos-raspi
arch	aarch64
timezone	Europe/Rome
config_dir	/config

Home Assistant Community Store

GitHub API	ok
GitHub Content	ok
GitHub Web	ok
GitHub API Calls Remaining	5000
Installed Version	1.34.0
Stage	running
Available Repositories	1401
Downloaded Repositories	9
HACS Data	ok

Home Assistant Cloud

logged_in	false
can_reach_cert_server	ok
can_reach_cloud_auth	ok
can_reach_cloud	ok

Home Assistant Supervisor

host_os	Home Assistant OS 12.2
update_channel	stable
supervisor_version	supervisor-2024.04.0
agent_version	1.6.0
docker_version	25.0.5
disk_total	228.5 GB
disk_used	6.4 GB
healthy	true
supported	true
board	rpi5-64
supervisor_api	ok
version_api	ok
installed_addons	Home Assistant Google Drive Backup (0.112.1), Samba share (12.3.1), Tailscale (0.18.0), Advanced SSH & Web Terminal (17.2.0), Filebrowser (2.23.0_14)

Dashboards

dashboards	2
resources	2
views	11
mode	storage

NextDNS

can_reach_server	ok

Recorder

oldest_recorder_run	20 aprile 2024 alle ore 22:51
current_recorder_run	28 aprile 2024 alle ore 19:54
estimated_db_size	218.75 MiB
database_engine	sqlite
database_version	3.44.2

Additional information

No response

[fkbidi]

Hi, I have the same problem. It seems to be due to the firmware. The parameters have not been implemented and a firmware update is required. However, I don't know if this is possible without updating the whole HA.

[ArthFink]

This is the code that needs to be added to the config.txt when using rasbian-64bit. All LEDs are off.

# Turn off Power LED
dtparam=pwr_led_trigger=default-on
dtparam=pwr_led_activelow=off
# Turn off Activity LED
dtparam=act_led_trigger=none
dtparam=act_led_activelow=off
# Turn off Ethernet ACT LED
dtparam=eth_led0=45
# Turn off Ethernet LNK LED
dtparam=eth_led1=44 

When moving this configuration, only the pw led is off, the eth_leds stay on. I have tried locating the device tree to see how the pins are mapped, but I could not find it in the repo.