core

core copied to clipboard

Add Yale Access Bluetooth integration

2

## Proposed change Add Yale Access Bluetooth integration Lib: https://github.com/bdraco/yalexs-ble/compare/v0.0.1...v1.1.2 Works with locks that have a Yale Access module: [YRD216/YRL216, YRD226/YRL226, YRD256](https://shopyalehome.com/collections/smart-locks) https://shopyalehome.com/products/yale-access-ugrade-kit-for-assure-locks-with-wifi?variant=34110396006532 Future PRs: - [ ] Support for...

bdraco

WIP: Add Awair Local API support

2

## Proposed change Add support for Awair's (beta) Local API. This API supports more frequent polling and will work when there is no Internet connection. Previous attempt in #39538 but...

zachberger

Fix lutron caseta Sunnata Keypad support to match actual DeviceType returned by RA3 Processor

10

## Proposed change Adjust the SunnataKeypad naming to match actual DeviceTypes returned by the RA3 processor. The Sunnata Keypads only return "SunnataKeypad" as the device type. I was overriding this...

danaues

Powerview Polling causing timeout errors

96

I put some logging in the new polling implemented under https://github.com/home-assistant/core/pull/73659 This PR resolvee https://github.com/home-assistant/core/issues/70043 but has unfortunately created an issue where shades will timeout from time to time. While...

kingy444

### The problem The fix for [issue 75223](https://github.com/home-assistant/core/issues/75223) broke things in the reverse sense. See my comments @rikroe after that issue was closed 3+ weeks ago. Now, the BMW connected...

SteveIsles

Bluetooth integration causing duplicate entries for H5100 sensor

11

### The problem I am on HAOS 8.2 with a XDO BT802 adapter. After I updated to the 8.2 version with the new Bluetooth integration I started seeing duplicate entries...

SignalGroup

Smartthings + Home Assistant Cloud: could not validate webhook

7

### The problem My Smartthings integration has been running just fine up until today when it stopped. I deleted the integration and wanted to re-add it, but am getting an...

domeq

Issues with Gledopto GL-MC-001 (2022.8)

1

### The problem After upgrading to 2022.8 I noticed that my Gledopto GL-MC-001 don't function correctly anymore. If I turn them on, HA says they are off most of the...

broyuken

Denon integration continually logs denonavr.exceptions.AvrInvalidResponseError: XMLParseError

2

### The problem I was able to successfully add my Denon X4700H to Home Assistant. However, every couple of seconds the below is being dumped to the home-assistant.log. Disabling the...

Cameronwyatt

System Bridge config failure

7

### The problem System Bridge configuration flow is unable to connect to host; therefore, the integration setup does not finish. I can open the URL in my browser though, so...

kjake