Hemanth-Jonnala
Hemanth-Jonnala
Can you please try to [flash the board](https://coral.ai/docs/dev-board-mini/reflash/#force-boot-into-fastboot-mode) with Ubutnu 18.04 or Ubuntu 20.04. Thanks!
Those logs are expected. Here is the complete reflash log: https://github.com/hjonnala/snippets/blob/main/devboardmini/flashlogs.md
> musb-hdrc: peripheral reset irq lost! This is not expected. I think re flashing the board would fix this issue. Please refer to the serial console logs at: https://github.com/hjonnala/snippets/blob/main/devboardmini/serailconsole_logs.txt#L285
Hello @in-die-nibelungen I don't see any logs on serial console while doing fastboot and It is recommended to connect Dev board mini only with usb cable while doing fastboot. >...
It seems you are able to connect to to device using mdt tool. Can you please try mdt push now
If possible, can you try to experiment by keeping the dev board in a thermal chamber and connect to host machine.
@kiteklan have you flashed the board using SD card?
@motilal76 please try with Tensorflow version 2.8.2. Thanks!
> /usr/local/lib/python3.8/dist-packages/keraslayers/convolutional.py:233 Error 'tf.Conv2D' op is neither a custom op nor a flex op Does this error occur during tflite conversion, if so please check with tflite support team at:...
> ERROR: Didn't find op for builtin opcode 'CONV_2D' version '6'. An older version of this builtin might be supported. Are you using an old TFLite binary with a newer...