CrystalDiskInfo
CrystalDiskInfo copied to clipboard
hiyohiyo
CrystalDiskInfo
Have redownloaded, turned on Advanced Disk Search, and tried a ton of other things and it just won't detect anything. Though, CrystalDiskMark works perfectly fine.
1>E:\gitwork_win\CrystalDiskInfo\Priscilla\MainDialogFx.cpp(255,7): error C2039: 'srand': is not a member of 'std' 1>C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.37.32822\include\ctime(21,1): message : see declaration of 'std' 1>E:\gitwork_win\CrystalDiskInfo\Priscilla\MainDialogFx.cpp(540,20): error C2039: 'rand': is not a member of 'std'...
**smart attribute is** F1 0xA9 169GB F2 0x21 33GB **but displayed vlaue is** Total Host Reads 0GB Total Host Writes 2GB Total NAND Writes is correct though [CrystalDiskInfo_20230912103252.txt](https://github.com/hiyohiyo/CrystalDiskInfo/files/12581811/CrystalDiskInfo_20230912103252.txt)
Almost all smart attribute is shown as vendor specific Here is the manual of the nytro xf1230 sata ssd [nytro-xf1230-sata-ssd-product-manual-100797573l.pdf](https://www.seagate.com/www-content/support-content/enterprise-storage/solid-state-drives/master/nytro-xf1230-sata-ssd-product-manual-100797573l.pdf) [CrystalDiskInfo_20230912065749.txt](https://github.com/hiyohiyo/CrystalDiskInfo/files/12587230/CrystalDiskInfo_20230912065749.txt)
It gets to the point that it stops responding for a few seconds. Settings I found that cause this: Resident, Advanced Feature > USB/IEEE 1394 > Jmicron JMS56X & Jmicron...
Not sure why its saying pcie 1.0 x4 when i get PCIE 5.0 speeds?  
I use an M.2 hard drive that CrystalDiskInfo8_17_14 can recognize the USB enclosure, download the updated CrystalDiskInfo9_1_1 but do not have the hard disk of the USB enclosure
You are using base10 units to correctly represent the drive size, eg. 1000 GB (1 000 000 000 000 Bytes), but you are using the same unit, "GB", to show...
I extraced CAtaSmart and the other dependences to build a new project. After run m_Ata.Init, the vars.GetCount() always return 0. I want to known if there some known issue or...
I wanted to check out the disk 3 with the software, as it triggered some alarm about its temperature, I decided to start the graph to log the temperatures. Left...
