Ilias Ktn

> > Am I doing something wrong or is the AC really consuming 50 Watts in Standby mode? 50Watts is also reported in my case. It's unlikely that two different...

Thanks for sharing your workaround @stevenings I would be interested in the actual standby consumption, mine is directly connected to the wall without a socket so I cannot measure it.

I found the official datasheet for my own unit (LG Ocean PC24SQ 24.000 btu) and it lists 2.5W as standby power (and 18W as thermostat-off power). So it is consistent...

The outdoor unit in my case (single-split AC) is powered by the indoor unit (an electrical cable runs along with the refrigerant pipes between the two units). Therefore, there is...

> No news here. Unfortunately the project of GDue went into a different direction, and so far none of our clients found this issue pressing enough to fund development. >...

> If you're on Linux, I've wrapped it nicely into a Script. > > **Review the script's contents**, rename the extension to just `.sh`, mark as +x and run as...

@GRACEBL > THANK FOR YOU GUYS , the app acutualy work with your method!!! I updated my comment with a few extra edits I needed to make and a link...

Since OpenHAB 4, these are the flags I use: ``` -XX:MinHeapFreeRatio=4 \ -XX:MaxHeapFreeRatio=12 \ -Xms64m \ -Xmx1024m \ -XX:-TieredCompilation \ -XX:G1PeriodicGCInterval=60000 \ -XX:G1PeriodicGCSystemLoadThreshold=4" ``` A few notes: - I run...