hemh

device vendor: HP device model: HPE 5130 48G PoE+ 4SFP+ EI Switch device sysObjectID: SNMPv2-SMI::enterprises.25506.11.1.189 function: Switch [root@cardlipamdev1 ~]# snmpwalk -v 2c -c XXX system SNMPv2-MIB::sysDescr.0 = STRING: HPE Comware...

Hi all, Netshot seems to be a great software, but unfortunately there is no driver for HPE switches. I try to write my own, I started from the Huawei driver,...

Thank you very much SCadilhac! It helped me a lot. I then learned how to use regex tanks to this site:https://rubular.com/ and I have been abble to write my own...

Other question, why the HPE driver is not automatically selected when I had a HPE device, like for cisco device? Each time, it is the Generic SNMP that is used...

Thanks, autodiscover work now. If other people are intersted in improve the HPE driver, don't hesitate to contact me by MP.

I am trying to use my driver on another HPE model (7900) and the driver is stocked, check the logs: [ERROR] I/O error: Timeout waiting for the command output. [ERROR]...

Hi, To bring more details about the above problem here are the netshot logs for a specific snapshot that doesn't work: 2019-10-17 13:16:38,290 ERROR [QuartzScheduler_Worker-1] TakeSnapshotTask: Error while taking the...

Thank you SCadilhac...Sorry for that, the problem was due to the fact that SSH prompt is different than TELNET prompt. Here is the telnet prompt: **login: login Password: ** Here...

So I change my password prompt. Here is the debug file of a host that doesn't work: [debug_2411.zip](https://github.com/netfishers-onl/Netshot/files/3745032/debug_2411.zip) Here is the driver updated [HPE switch 3208P03-v2.zip](https://github.com/netfishers-onl/Netshot/files/3745066/HPE.switch.3208P03-v2.zip) Here are the Netshol...

It is a telnet attempt,