hasan-akbulak

Testing with cm5 during startup still getting stuck on systemd-journald.socket for 30-60 seconds and dtparam=sd=off is not detected. seems to be unsuccessfully halting/rebooting without sd card present. still gets stuck...

still stalling on systemd-journal.socket when booting ssh takes about 30 seconds to connect. however when booted stalls are less than 5 seconds for commands and halting and when actually halting/rebooting...

still having this problem with the raspberry pi compute module 5 with linux 6.6.51 6.6.74 and 6.12.19 from rpi-update. I also have the latest eeprom with sudo rpi-eeprom-update -a. It...

root@raspberrypi:~# vcgencmd bootloader_version 2025/03/19 13:41:26 version cec1d3ae40f4a1cb24fe3c42d60153968695385b (release) timestamp 1742391686 update-time 1742896386 capabilities 0x0000007f

whenever i try to shutdown or reboot the pi it still has the same issue of stalling inbetween 20-50 seconds and dmesg still reports mmc errors even when the sd...

tc@raspberrypi:~ $ sudo vclog -m 005414.426: Initial voltage 800000 temp 42226 005614.834: avs_2712: AVS pred 8945 894500 temp 42226 005618.442: vpred 894 mV +0 005632.134: FB framebuffer_swap 1 005651.534: Select...

i am sorry these parameters were from a non fresh install let me do a fresh install to remove any extra variabels. default settings everything i only did a sudo...

sorry i don't know how to fix the layout issue to make it more readable i am quite new to github

also just found this in dmesg: ''' [ 7.107845] Bluetooth: hci0: command 0xfc18 tx timeout [ 7.107856] Bluetooth: hci0: BCM: failed to write update baudrate (-110) [ 7.107858] Bluetooth: hci0:...