Chad Page

My advice is to finish whatever you want to add - if anything! - for yourself, fix whatever bugs/deficiencies you can, then set it aside and call it done. Sometimes...

To rephrase that, since the .json file knows (or should!) how many EFM samples are output per field, it could be used as a timestamp for all the 80's disks...

@staffanu - forgot to take a look at this, I really should give it a spin. Quite nice that you built a replica! OTOH, I did some more tuning of...

Any chance you could do a similar comparison using a disk that ld-decode's current code _can_ decode properly? It'd be interesting to see the difference in waveforms. I looked at...

Here are the EFM filter circuits from the CLD-S180/S280(/S105) service manual. It's definitely a non-linear filter with a couple of comparators and filtering *after* those (i.e. a reshaped signal) The...

Interestingly, I just looked at a CDDA capture off my V2800/DDD, and it decoded an entire song _mostly_ cleanly with the occasional pop/lost sample, without _any_ filtering: > >Info: F2...

About an hour ago, I got an .oga in my gdrive from Gamn (thanks!). Decoded a bit worse than my CDDA cap: >Info: F2 Frames to F1 Frames: Info: Valid...

Playing around with gain levels - the current test (w/o any RF filtering) is very sensitive to clipping, but even well below that it there are still errors. That there...

BTW, for projected output length for .ldf i'll need to add a bit to ld-ldf-reader to get the file size. Should be doable but not quite as easy as the...

Probably not going to finish this for rev7, but I'm going to do some output cleanup for it in any case. Realized I'd have to refactor the input function objects...