hamidmoezzi1988

Hi everybody. I intend to calculate the mass flow rate in my 2D axisymmetric simulation using the dsmcMassFluxSurface feature of dsmcFoam+. I defined a face in zonesDict and the corresponding...

How to impose vacuum BCs in dsmcFoam+

7

Hello all, I was wondering how I can impose vacuum boundary condition. I tried to use 0 for the outlet pressure in dsmcLiouFangPressureOutletSpecifiedMolarFraction BC, but it results in FPE error....

Hi everybody, I want to study the behavior of Ar gas and the ions (generated in the plasma) in the interface section of an Inductively Coupled Plasma Mass Spectrometer (ICP-MS)....

Unphysical Temperature gradient at the boundary

1

Hi everyone, I am simulating argon gas flowing with 80kpa pressure and 4000 K temperature into a low-pressure region of 10 Torr with dsmcFoam+. I initialize this 2D axisymmetric simulation...

Hey all, I have a problem with implementing constant pressure outlet BC. I consider the outlet as open and then add the followings to the parameter.ini file: Part-Species1-Surfaceflux2-BC=2 Part-Species1-Surfaceflux2-velocityDistribution =...