Hamilton Chapman

I've got a fork that I'm working on at the moment which adds macOS support and updates the Tesseract version to 4.0.0 (currently I'm just using HEAD of the repo...

Do you have bundler installed? If so, navigate to the slogger directory in terminal and run bundle update. That should fix things.

Sorry, I've been too busy to give this any attention recently. To be candid, the sort of attention I can give this more generally is pretty bursty rather than anything...

Thanks for the suggestions. I've tried using a higher sample rate but things look pretty much the same, same with different placement. I'm using an RTL-SDR v4 with [this antenna](https://www.amazon.co.uk/dp/B08WJ9LRMB)....

I played around with the sample rate and some other flags and ran this: ``` rtl_433 -f 868.3M -s 2048k -g 28 -A -S all ``` and got what _looks_...

And here's what I hope is an even cleaner capture: [g014_868.3M_2048k.cu8.zip](https://github.com/user-attachments/files/19895874/g014_868.3M_2048k.cu8.zip)  I still can't seem to make any sense of it using `urh` though. Has anyone got any ideas...

> Do you get any other clean signals to rule out a broken setup (antenna or such)? I've not got anything else "known" that I could try, if you know...

I've ordered [a keyfob](https://cpc.farnell.com/rf-solutions/fobber-8tl1/keyfob-transmitter-868mhz-on-off/dp/RF00910?fi=wp) that should help me test at 868MHz. In the meantime I've tested with that 434MHz Somfy remote I mentioned above and got this capture from it,...

Okay yeah, it looks like things are a bit clearer at 869.5MHz. Here's a capture having run: ``` rtl_433 -f 869.5M -Y filter=50000 -s 2048k -M time -R 0 -S...

I tried without the antenna and couldn't seem to get any signal being recorded at all, even after cranking the gain up to 40. I tried moving further away from...