hajes29a

I am having same issues. After last two upgrades, there is something funky. After initial sync, all was ok...then it got stuck at high CPU usage around 180% and 32%...

Debian Linux full server (no VPS, no VM), no pool mining. I am running at least full node (as a part of contribution) because mining is not profitable. After hard...

no luck in CPU hog department, but monerod is currently hogging 49% of RAM (16GB). Is it normal? I have over 1GB of logs...at level 2, it is producing 300MB/hour

it finally happened. from 2am...monerod runs `210.0% CPU 46.9% RAM (about 14GB) monerod ` flat out for almost a day, without any signs to end up there is gigabytes of...

something happened on 2022-10-19 around 4am UTC - monerod jumped from usual cpu usage to 200%+ it runs flat out for days if you don't kill it...I have killed the...

I have removed from config rpc-bind-ip=0.0.0.0 # Bind to all interfaces rpc-bind-port=18081 # Bind on default port confirm-external-bind=1 # Open node (confirm) restricted-rpc=1 # Prevent unsafe RPC calls no-igd=1 #...

Guys from chiaforum said it is normal - explained by Harold himself in Chia Discord.

``` Completed Plot 1 in 151.47 seconds ( 2.52 minutes ) /ramdisk/plot-k32-c07-......plot.tmp -> /ramdisk/plot-k32-c07....plot Completed writing plot in 18.71 seconds ``` using `ramdisk` as [suggested](https://github.com/Chia-Network/bladebit/issues/375) by harold `bladebit_cuda 0.0.0-dev` I...

Or use block based ramdisk `brd`

I recall issues with classical Chia plotting. Linux needs NUMA locks, especially on SMP machines. Otherwise, threads jump from core to core, to RAM/RAM, to CPU/CPU...wasting lots of time. Plotman...