Carl-Daniel Hailfinger
Carl-Daniel Hailfinger
@CL-Jeremy Of course it makes sense to have acmetool listening on other ports. The documentation even mentions it. @kaikrueger I had the same problem and fixed it. Rootless operation is...
Sorry, this bug tracker instance in github has been activated by mistake. Please mail [email protected] to reach the developers. Thank you.
Am 19.05.21 um 15:04 schrieb Alex Murray: > > So either disable LTO when building flashrom or perhaps there > is a way to disable it just for the tests...
AFAICS this was merged in mainline Linux 5.16.
@timemaster5 This might be fixed in firmware release edf2e9c318863999c97c50cdb74eee235ede3af5 which will hopefully reach your Pi with a regular update soon.
Try adding `over_voltage=2` to config.txt. If that doesn't help, try increasing until `over_voltage=6`. For my fleet of ~150 devices, a majority will behave with over_voltage=2, those which are still not...
Ah yes, that might explain the difference. I'm on a Raspberry Pi 4B.
Thank you for the explanation. Makes sense, I can work with that.
Indeed. The following snippet reads the currently running VL805 FW version: lspci -nxxx -d 1106:3483|grep "^50"|sed "s/^..: \(..\) \(..\) \(..\) \(..\).*/\4\3\2\1/"
Make sure to disable systemd-pstore.service if you want all logs from pstore. Other ramoops collection software may work better (I haven't tested that), but at least with systemd-pstore I always...