Gopal Yalla

Yes, that's correct

Here is an example input file that corresponds to the orange dot on the power curve (ARM-Wind, precursor) [MedWS_LowTI_farmrun1_inp.txt](https://github.com/Exawind/amr-wind/files/14794494/MedWS_LowTI_farmrun1_inp.txt)

Sorry for the delay in getting the ADM results -- there was a change in the module systems on our end that caused a bit of a slowdown. I've added...

Good find Michael, and thanks for the update! @jfrederik-nrel is correct that all of the cases I've done so far are run at 270 degrees.

This case was indeed made with the amrwind-frontend. Here is an image of the refinement zone:  The level 1 mesh does extend below the bottom z-boundary. It does seem...

Right now I can only confirm that the refinement on, boundary I/O on, and actuator off case seems to work with 512 CPUs if the refinement is adjusted to start...

One issue I forgot to bring up during our call just now. I'm rerunning the uniform and precursor cases again to ensure the results do not change when going from...

Thanks for the update, Joeri, and please let me know if I can help in anyway. I'm seeing the issue across Sandia machines including eclipse, ghost and doom. There was...

Interesting that combination seems to work across machines. There was some talk today on our end about trying intel compilers to see if that would alleviate the issue. Have you...