guyverckw

Can you point me to the link of Python implementation? Thanks a lot.

Thanks a lot!

I got the latest commit and use the following: sudo ./led-image-viewer --led-show-refresh --led-brightness=50 --led-rows=64 --led-cols=384 --led-chain=1 --led-parallel=2 --led-row-addr-type=3 --led-panel-type=FM6126A --led-slowdown-gpio=3 -C ~/share/Cinnamoroll_a1.gif at least this make all 3 panels work,...

tried this : sudo ./led-image-viewer --led-show-refresh --led-brightness=50 --led-rows=64 --led-cols=128 --led-chain=3 --led-parallel=2 --led-row-addr-type=3 --led-panel-type=FM6126A --led-slowdown-gpio=3 --led-pwm-dither-bits=1 --led-pwm-lsb-nanoseconds=50 -C ~/share/Cinnamoroll_a1.gif and this : sudo ./led-image-viewer --led-show-refresh --led-brightness=50 --led-rows=64 --led-cols=328 --led-chain=1 --led-parallel=2 --led-row-addr-type=3...

I think you're right, very likely cable problem. Let me try to get some short cable. For the power, I am already using a 40A power supply, however, will test...

one more question: I am currently using the active board with E-pin set to 8 because of the old HUB75E panels.  For these new HUB75 panel, since they are...

> Hi, > I think I have one panel similar to your. It is a P2 64rx128c HUB 75 panel. >  > > I didn't connect pins D and...

BTW, here is how the [3x3 P2 LED Matrix works like](https://youtu.be/ebOP8b2N9vU)