gusvisser
gusvisser
a feature request for adding pullcompensation in two direction one in the direction of the stitch angle and one perpendicular to it since there is more pull in the stitch...
as i downloaded a svg file on the hat and run it through the simulator i get complete different sewout so please what i happening i am trying to learn...
in the new release from kalleen it appears there is an issue with the satin tools as i converted a line to satin it broke the line in two parts...
As i was doing a project with running stitch and manual stitch placement i found out that the auto route running stitch is not working on the manual stitch placement...
I hardly ever use the inkstitch fonts but i did some testing and checking on a few fonts and noticed there are a lot of improvements possible there are letters...
[dst files.zip](https://github.com/inkstitch/inkstitch/files/13836930/dst.files.zip) Please find attached zip including image of embroidery machine in question and two DST files The file ropedesign2 was created in inkscape with inkstitch everytime i have to...
Normally i always create my outline and fill as seperate objects I was asked to have a look at a file from someone else and here the fill and stroke...
I have had a few DST files that the tajima embroidery machine cannot read the data the only way i was able to get around fixing is that i had...
As i was working with a number of stroke to satin conversions and tried some zigzag to satin i ended up with a lot of unneeded rungs so i was...
 I was playing with some settings on the ripple stitch and after changing minor settings it gave a full fill area with a stitch count of 107000 stitches on...