gustavobsch
gustavobsch
I pulled the 6.3-rc branch. compiled and booted from it and noticed the rj45 sfp stopped working. As I didn't have time to play with it and 6.2-rc has been...
It's the tplink from aliexpress model TL-SM410U I will give the 6.3-rc another try
Oh ok, got confused, do you have plans to add Daniels patch to your 6.3 tree?
Thanks for the tp-link quirk patch, the SFP is working now in 6.3-rc. I will test the 6.2-main now, I noticed the fiber SFP is not detecting link.
> have added the tp-link quirk, but daniel reports that it is not clean working and they search the issue > > https://www.spinics.net/lists/netdev/msg892902.html > > btw. there is 6.2-main...better than...
Thanks, I'll pull 6.3-main. I tested two, I can see them but link is not detected Brocade 57-1000013-01 Cisco GLC-SX-MM=
Ok, my bad, last time I tried to make the SFP work I played too much with it and let auto negotiation disabled on the other side.. so after enabling...
I just build 6.3-pwm and booted from it and I can see the vlan tags in the packets. Amazing, thanks!
I've ran into this kernel panic twice now. I need to reboot to clear it. You think it's related to the a ``` [20795.193278] ------------[ cut here ]------------ [20795.197920] NETDEV...
I don't, but it hasn't crashed today and yesterday when it crashed I was copying big files through SFP1/SFP2. I'll run iperf3 test and see if it crashes again