gullradriel

remux eats 40% of the CPU after a while on 3.8.2.1965

10

Following tests on [that discussion](https://github.com/timower/rM2-stuff/discussions/32) to install 3.8.2.1965, I tried to use remux instead of rocket. While the manipulation worked and remux is always displaying on swipe, at some point...

Jump to app button

2

**Is your feature request related to a problem? Please describe.** It's boring to jump from app to app. Each app has to make a lots of buttons to allow switch...

Support for CALLSIGN

1

As some apps like Recon or Mic are acting as HamRadio software, we would like to add a CALLSIGN support in the firmware. It could be per app or global,...

Actual Repeater mode in Recon is activated is signal is exceeding squelch, but there is no tone check. We could add a CT tone detection and compare it to the...

Repeater: TX offset instead of TX frequency

1

Actual Repeater is using frequency_b as a defined frequency and not as an offset of frequency_a. This is due to various places in freqman files expecting a frequency to be...

Long press pen button action not working on splitted view

1

If you use split view and a Lamy pen, the 'keep pressed' function is not working on the splitted view. Single and double click are okay. Latest 0.0.10 / 3.11.2.5