Gunnar Skjold

I must have accidentally reverted something I shouldn't, but fixed it now. Please try this version: [esp32s2.zip](https://github.com/UtilitechAS/amsreader-firmware/files/14292685/esp32s2.zip) [esp32c3.zip](https://github.com/UtilitechAS/amsreader-firmware/files/14292688/esp32c3.zip) [esp32solo.zip](https://github.com/UtilitechAS/amsreader-firmware/files/14292689/esp32solo.zip) [esp32.zip](https://github.com/UtilitechAS/amsreader-firmware/files/14292693/esp32.zip)

Interesting stuff. How is your energy dashboard configured in HA?

> "Consumption Last Month" above is also wrong. Correct value for December is 2353kWh. If you loose data, this is to be expected. Consumption for last month is stored when...

Here is a firmware where tariff thresholds have been enabled for sweden [esp32solo.zip](https://github.com/UtilitechAS/amsreader-firmware/files/13463461/esp32solo.zip) [esp8266.zip](https://github.com/UtilitechAS/amsreader-firmware/files/13463462/esp8266.zip) [esp32c3.zip](https://github.com/UtilitechAS/amsreader-firmware/files/13463463/esp32c3.zip) [esp32s2.zip](https://github.com/UtilitechAS/amsreader-firmware/files/13463464/esp32s2.zip) [esp32.zip](https://github.com/UtilitechAS/amsreader-firmware/files/13463465/esp32.zip)

Here is a test version with translations. Please note: - This is a development build. Only flash this if you know how to erase and flash official version. - Upgrading...

German is now available on the server. Also, updated firmware: [esp32solo.zip](https://github.com/UtilitechAS/amsreader-firmware/files/14051033/esp32solo.zip) [esp32.zip](https://github.com/UtilitechAS/amsreader-firmware/files/14051034/esp32.zip) [esp8266.zip](https://github.com/UtilitechAS/amsreader-firmware/files/14051035/esp8266.zip) [esp32c3.zip](https://github.com/UtilitechAS/amsreader-firmware/files/14051036/esp32c3.zip) [esp32s2.zip](https://github.com/UtilitechAS/amsreader-firmware/files/14051038/esp32s2.zip)

Thank you for the thorough feedback. As I read it, the following commit is sufficient to remedy this specific situation: https://github.com/UtilitechAS/amsreader-firmware/commit/e575ab755c540cec450b49ff1ba0e55bc2cbbea9

The accumulated values will always start at 0 on a reboot, and since Norwegian meters only report accumulated values once per hour, it will keep doing so until it gets...

I am honestly not sure what is going on here, could you export a configuration file and send me? [email protected]

Cant really see anything wrong with your config. Please try v2.2.27 and untick "Allow 802.11b legacy rates"