grigorgeous

@MrBLJ I have the same problem -- ESP32+CC1101 just doesn't send anything after I press "PROG" on the webserver according to my SDR. Have you figured out how to fix...

> I came back to this after a while, and followed @ftpproxy's advice. Unfortunately, the issue remains the same. @ftpproxy, could you specify the type of emitter you're using ?...

@MrBLJ Wiring looks just fine. Try soldering it directly, this should do the trick. However, I cannot sniff anything with rtl_fm, too. I want to sniff codes because my ESP32...

@MrBLJ Ok, I've resolved the issue with sniffing. Installing rtl_433 with apt was a mistake -- it is very outdated. I had to build rtl_433 from the source, and it's...

> Hi @grigorgeous. Thanks a lot for your insights ! > > 1. I'm soldering the wires today, and will report in case of significative improvement. > **edit**: Done soldering....

@MrBLJ I'm glad my suggestions helped! :) As for codes, yesterday I checked codes sent by multiple remotes and ESP32 I have, they all send different codes. I don't really...

Ok, I've just changed the code in somfy_secrets.h for my OFFICE blinds, and it helped to reset it. I reprogrammed it successfully keeping in mind the above-mentioned reprogramming logic --...