grill

It could be true that my board didn't even get picked up by Mac. Is that the problem could happened from USB dongle. If that true, Is there a way...

Oh I see, so I could try to connect my board with micro usb cable with power wires and data wires right? Thanks a lot!

There're still error that existed when I already found the board in local machine: The error:  Could be the problem because I install Vivado on external SSD?

Right now, this an error after I use [openFPGALoader](https://github.com/trabucayre/openFPGALoader) to load bitstring to the board `bind: Address already in use`

I use this command `openFPGALoader -b basys3 main.bit # Loading in SRAM` and `openFPGALoader -b basys3 -f main.bit # Writing in flash`

No, when exited Vivado, xvcd will be exited too.

@james-kollross For the workaround, I use [openFPGALoader](https://github.com/trabucayre/openFPGALoader) to load bitstream generated from Vivado.