grex93

i have the same problem, do you solve it?

hi, i'm using an arduino mini pro, and i attach pin like in the example ( photo) . I have for the basic test this result: 1000 initialized ... Committed...

i follow exactly this example: https://github.com/thotro/arduino-dw1000/blob/master/adapterBoard/AdapterBoardTestBed.png but instead of 330ohm i used 470 ohm.. i put ground and vcc from the left side, like in the example...is it correct? (...

i follow exactly this image...  i'm sure about the red one and the blu one ( VDDAON and GND) , but for the others i follow the image .....

hmatulis can you help me with the pin connections?

ok, so i must connect spiclock to pin 13, but the spicsn i think i must connect it with pin 10 of arduino pro mini . can i connect only...

Now i have: Device ID: DECA - model: 1, version: 3, revision: 0 Unique ID: FF:FF:FF:FF:00:00:00:00 Network ID & Device Address: PAN: 0A, Short Address: 05 Device mode: Data rate:...

thanks a lot! =)