greenspeedracer
greenspeedracer
> Please try setting ac_mode: true with your cooling entity as heater. That doesn't work due to the way you have ac_mode configured. To anyone else who wants to correct...
Let me know if I can be of any assistance since I created the majority of it. Also, I’m not sure allowing T to be input as a non-whole number...
Do I need to submit mine as well?
OK. I can only speak for my original work and how it works. If need be I can submit it in a few hours after work
> @greenspeedracer you did a very good job but it can only be used fully with Home Assistant, if we don't have it it's more complicated. With what I brought...
> ok, do what you want it's your job after all. But please think of those who are not under HA the exposure of PMTSD is essential and the response...
> Okay, I misunderstood the meaning of your sentence. I'm not a native English speaker. > > Yes, I: > > * exposed the PMTSDs > * checked if the...
Prior to figuring out the PMSTD protocol, I was using an automation that would briefly flash the setpoint as the external sensor temperature as a form of feedback since there...
I'm not at home, so this is just an assumption, but I would bet I was not specific enough in defining the PMTSD request. I only look for the 08000844...
> @Noyax-37 are you still planning to add your custom converter via a PR? In my opinion your approach of exposing the PMTSD attributes directly via zigbee2mqtt is the better...