hackrf

hackrf copied to clipboard

### What would you like us to add to or change about the HackRF One documentation? The list of hardware revisions documentation page should have some overview of why the...

miek

RF Scanning on HackRF One

2

### What would you like to know? Hi. First up, I trust this is the right place to ask such a question. Apologies in advance if I have messed up....

greghains

SoapyHackRF how to transmit buffers smaller then 262144 and buffers greater then 262144

1

### What would you like to know? Currently looking at SoapySDR and SoapyHackRF logic. I have found that I need to pad out the transmit buffer for the Hackrf to...

smileyrekiere

Sync hack rf one

1

### What would you like to know? Hi, hackrf one receives a rectangular pulse with a frequency of 10 MHz 3.3 V on CLK in, is it possible to reduce...

AlMasz2837

Can't enable BiasTee in GNU radio for HackRf-One and RTL-SDR.

5

I am trying to transmit and receive a sine wave with hackrf as tx and rtl-sdr as rx. Hackrf is the latest hardware, The Latest GNU radio on Windows 10...

MuhammadQaisarAli

Add KiCAD 7 files Add VERSION & DATE fields to accordance to GSG best practices Update other 'page settings' data

yhetti

Replacement of TPS62410 Buck converter

2

 ### Have you read the HackRF [documentation](https://hackrf.readthedocs.io/en/latest/)? yes ### What outcome were you hoping for? I have a unit from 2014, when plugged in, it is recognized after a...

anxzik

Why hackrf_sweep use INTERLEAVED mode and discards data from a center of filter?

5

### What would you like to know? Hi, As far as I can see from `host/hackrf-tools/src/hackrf_sweep.c` code, It takes samples with a center frequency at +7.5 MHz (at 20 Msps,...

kubrack

Closes #1448

straithe

Antenna working frequency!

3

### What would you like to know? The working frequencies of the HackRF One range from 1MHz to 6GHz. However, neither ANT500 nor ANT700 works in the range of 5GHz...

FadySamann