grapexy
grapexy
I have Many-to-One multipath configured with 2 WAN links on site A and 1 WAN link on site B. Both of site A links are symmetric 100 Mbps. Site B...
I have 2 boxes in the network, both of them having direct link and using version 1.10.1: 1. Opnsense with 2 WAN links (through vlan04 and vlan05 interfaces) - 172.22.0.1...
### Is your feature request related to a problem? Please elaborate. Upload speed limits are set per torrent whenever the tag is updated. However if I change the upload speed...
I see some kind of traffic leaving VPS from port 65228 with destination of each WAN IP every couple of minutes. I haven't looked into the packets yet, but is...
OMR is sitting after opnsense router as gateway that has some devices that use VPN (OpenVPN & Wireguard). Some of these connections are not aggregated, some of them are. Trying...
## Expected Behavior When "Disable default gateway" is checked in Advanced settings and VPS becomes inaccessible, internet should not be reachable from any of the WAN interfaces. ## Current Behavior...
From a week or two of testing ZT multipath, I've learned that following documentation will often lead to many hours of debugging, only to discover that docs were wrong. [Multipath](https://docs.zerotier.com/zerotier/multipath/)...
OS: FreeBSD 13.1-RELEASE (OPNsense 22.7.2-amd64) ZT branch: 1.10.1 After building ZT with `gmake one ZT_DEBUG=1` and running `zerotier-one` in foreground, only interface name is printed out, without any logs. However,...
Continuing issue first noted in https://github.com/zerotier/ZeroTierOne/issues/1745#issuecomment-1275637322 Zerotier becomes unresponsive when balance-aware mode is used after changes made by the latest commit on dev branch (https://github.com/zerotier/ZeroTierOne/commit/e1f60e3). I believed this was related...