gordonfpanam

@codesquid ferram4's right; this isn't for this bug and I moved my post to a new issue. But if you want to reproduce a drag problem in stock parts, using...

> R32 for MOS 6581: to align the schematic and the interactive BOM list MOS 6581 as in a SID chip? Is this an attempt to integrate the SID for...

I'd be interested in changing the localization strings for other in-game UI text as well as for parts. For instance, references to Kerbin in error messages could get replaced with...

YouTube user Vicenary has a fully working 6560 / 6561 replacement working, that is just begging to be integrated into this project. https://youtu.be/gu8HzBcfQoE

R37 was 100 Ohm and C57 was 470 picoFarad. I checked these against the configuration doc and these didn't have any difference. These were in the interactive bill of materials.

I haven’t tried the alternate passives yet, but I noticed I omitted R32 on one of the builds. I think I ran out of those and just decided I didn’t...

Slightly louder is actually a good idea. The 6581 with R32 omitted still sounds somewhat quieter than the TED audio, but that might be subjective. I even turned the volume...

I ended up replacing most of the 6581-specific caps and C52 with an aluminum one, and this seemed to improve SID audio a little bit, but replacing R37 with a...

I ended up setting JPs 15 and 16 as you suggested, to the left / away from the joystick ports. I didn't notice a difference in SID audio quality, but...

I think I did the cut by accident the first time. I went to remove the solder from the JP8x pads to find the wick “wasn’t working,” then took a...