Jose Gomes

Hi, Please check the instructions: for 6.0 the version of binutils is 2.22. Also, it should work just fine on CentOs 7.x, provided you have the appropriate version of glibc,...

Are you using the build script (build-r8152-2.06.0_u60.sh)? The following line will be set at the top: LD=/build/toolchain/lin64/binutils-2.22/bin/x86_64-linux-ld So, if you are using the script and binutils-2.22 is available you should...

Hi, Firstly, you don't need to put the server in maintenance mode, nor do you need the "-f" flag. However, you must provide the full path to the VIB file....

Hi, You need to disable the vmkusb native driver with the following command, then reboot: esxcfg-module -d vmkusb

Hi, Could you please post the results for both of the following commands? lusb vmkload_mod -l | egrep "r8152|usb"

Hi, Your email listing the output of vmload_mod /-l shows the vmkusb_usb_fling module loaded; that’s effectively the vmkusb module plus the FreeBSD ax8179 and usb_cdc modules loaded. You need to...

Hi, No, the UE300 dev ID is not included on the fling, and I have already reported it to William and Songtao Jose

> Hi there, > > I'm new to ESXI and I'm trying to get it working on my NUC for fun, I've stumbled across guides referencing your files. I now...

> Foolishly, I neglected to tell you WHY I provided that information. > > I suspect, it's possible that Realtek / TPLink are using a new chip or identifier, hence...

> Alas, I ran that command and no luck. > > I re-isntalled the 2.11 driver (I had 2.06 on, in desperation) - no luck. > > [root@localhost:/var/log] esxcli software...