gomble

Same for me. I think the calibration in this custom component does not work. It is fixed here: https://github.com/Koenkk/zigbee2mqtt/issues/11777

and ? how it is ? how long we must wait ?

I have exactly the same problem

> I assume both of you are using libdile_vt? > > Have you used some older piccap version? If so, then please try running `rm /var/lib/webosbrew/init.d/piccapautostart`, then go to piccap...

> I investigated a workaround to autostart the capture service without rebooting the tv or disabling the quick start. I used home assistant to turn off and on the capture...

> in which format is your ssh key ? i got following error: ➜ /config ssh -i "/ssl/lg_homeassistant_private" -o "StrictHostKeyChecking=no" [email protected] "bash my-piccap-service.sh {{ command }}" @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: UNPROTECTED...

> `Permissions 0744 for '/ssl/lg_homeassistant_private' are too open.` That's a good summary. You first need to run: > > ```shell > chmod 0600 /ssl/lg_homeassistant_private > ``` okay its working thank...

After Reboot of Hassos: 

> That seems like an excessive CPU load indeed. > > Are you using a router with mDNS reflector and/or VLANs? no i have only 2 fritzboxes in a mesh...

Need Bypass Jailbreak for this too :/