Alex

I'm kinda sad it's still not working after the recent beta updates :( It might done something, because the app crashed when I started it, and I was unable to...

Have you read the [FAQ](https://lasergrbl.com/faq/) as mentioned in the error message? If not, start with `“Problem detected” message: hang or disconnect during engraving` section. For the Mega, I'm sure it...

You can't (easily) edit `.hex` files. But you can, however, flash one that has Z axis homing disabled. In LaserGRBL, click `Tools` -> `Flash Grbl Firmware` -> Chose Uno ->...

> > You can't (easily) edit `.hex` files. But you can, however, flash one that has Z axis homing disabled. In LaserGRBL, click `Tools` -> `Flash Grbl Firmware` -> Chose...

Sorry for the late reply, I've tried to make a tutorial how to edit & upload GRBL to a mega. 1. Get [GRBL Mega 5x](https://github.com/fra589/grbl-Mega-5X) (Click the green `code` button...

> I try and still no luck > I can not connect to the mega with lasergrbl Does LaserGRBL show any error messages? Could you upload LaserGRBL extended log after...

I suspect another issue here, since neither LaserGRBL nor UGS can see your MCU. By extended log, I meant `?` sign in LaserGRBL -> `Activate extended log` -> Select a...

What is the output text when you finished flasshing in Arduino IDE? (the orange text at the end) I suspect either your USB cable, USB port or Arduino USB to...

While it may be a good idea to implement a feature like this, please note that the format would be no standard, and everyone would need to implement their own...

Could you please take a screenshot of the error message? Or try to copy it with `CTRL+C`? It would help a lot in solving your issue.