gmiranda
gmiranda
@fruza that's an issue with the way OSMC builds the kernel headers. You'll have to download the kernel sources and install them manually. See here: https://discourse.osmc.tv/t/usb-wifi-device-wth-rtl8812au-chipset-is-not-working/84070/3
Did this not make it into a release?
Thanks for the reply! I might try to use a level shifter and if it works I'd like to collaborate documenting it, if you're open to that
Hi borti, Thanks a lot for replying. I was planning on avoiding Mouser and instead go to LCSC, but now I see that I'd have to use a lot of...
> Not sure, if you are using the latest version. Last version has no U7. For the flex, you have to select "yes" for gold fingers (pins at the end...
I'm now going through the flex pcb BOM and I'm having a similar issue with U1 as I did with former U7. Searching for 74LVC1G17DBV returns quite 6 different part...
Sorry to keep bothering you... Are the pads of the clamps D21 and D22 intended to be electrically connected? I mean that with the bare PCB there's connection between the...
I guess the answer is yes. I just don't understand how these clamps work.
That's great news! I hope resoldering is not required. Would it be useful for you if I switch to the pre-3.0 branch?
Thanks!