Gábor Géczi

I would like to ask, will there be MQTT5 support in the near future? Thank you very much for your work! Regards: Gábor

Hello @per1234 ! Yesterday I was faced with the same error. I analyzed it for a long time before I found this post. I would like to summarize my experience,...

I think the reconnection occurs after a message is sent. (I send the uptime every 10 seconds on mqtt) Could it have anything to do with the message being sent...

In my case the problem was caused by QOS1. Currently, the library cannot handle QOS1, and this is what caused me to lose the connection. Since I set it to...

Hello! Thank you for being active on this topic again! I'm assembling my SPA this Sunday, and I'd like to help testing it. As soon as I can, I'll do...

The problem persists on version 2024.12.5. It is still not possible to specify a helper as a controlled output.

Hi @frenck ! Thank you for your reply! I looked at the closed topics, some people have made the extension but it was rejected, but I don't understand this situation....

You are absolutely right. I was not very experienced in HA when I made it a long time ago. Unfortunately, this still does not solve the basic problem. There is...

I have the same problem. Has anyone found a solution? @gedl @J-Prince @sovapatr The two subnets are directly connected with wireguard, freely passable, yet webrtc cannot pass through. I created...

I started testing the problem from many directions and came to the following conclusions: - Even though I created an EOIP tunnel between the two subnets, and my laptop received...