git-minix comments

Results 7 comments of


                                            git-minix

How can I suppress the output when activating Logitacker?

guess this helps `$ log backend m_cli_cdc_acm_log_backend halt` `$ log backend m_cli_cdc_acm_log_backend disable` https://github.com/RoganDawes/LOGITacker > Note: Makerdiary MDK exposes two USB serial ports (one belonging to CMSIS-DAP). Be sure to...

xum1541 on a pro micro - works only the first command. After that, led blinking.

I have exactly the same issue with my ZoomFloppy on Linux Mint 18.3 and a ROG Crosshair VII Hero board with a Ryzen 2700x. I've tested it on the USB...

xum1541 on a pro micro - works only the first command. After that, led blinking.

some additional information to the reproducible issues. Issue persists if I replace the Floppy device (1581 , 1571), replace the IEC Bus cable, or replace the USB cable. What works...

xum1541 on a pro micro - works only the first command. After that, led blinking.

and here the usbmon trace (to the first posting) $ cbmctrl status 8 ffff97fb27334780 574048555 S Ci:1:010:0 s 80 06 0300 0000 00ff 255 < ffff97fb27334780 574051265 C Ci:1:010:0 0...

xum1541 on a pro micro - works only the first command. After that, led blinking.

what works fine with cbmctrl is download and upload - no issues after several executions

xum1541 on a pro micro - works only the first command. After that, led blinking.

UPDATE: I bought a xu1541 and compiled in opencbm the xu1541 plugin. No issue here - I can execute multiple detect and status commands without any issues. My conclusion: The...

xum1541 on a pro micro - works only the first command. After that, led blinking.

The only chance to get the root cause of the problems is debugging the xum1541 firmware - but: "To enable the debug build, uncomment the appropriate line in the Makefile....