gioreva
gioreva
Received now HackRF one. With CubicSDR work well, but with your nothing appears. Start buttor returns immediately available. On Setup I put. Backend= hackrf_seweep No device and no parameter
hackrf_sweep crash windows: https://pastebin.com/p1jmF7yQ Once he has done a lot of similar lines. 0 total sweeps completed, 0.00 sweeps/second This is "soapy_power -d driver=hackrf --debug" respons It once worked, but...
This: https://pastebin.com/R3r4cfDA
I can't add other PC on my laboratory. Now hackrf_sweep work, but nothing appairs. https://pastebin.com/YhgHYG4G On setup: backend= hackrf_sweep add par= device= sample=20 bandw=0 LNB=1 start=88 stop=108 bin=10
If i reset board after each run, it work. (sopy_power) But why do I have more trouble than signal ? https://snag.gy/J0vRnX.jpg Are bad the board or I something wrong?
Yes, need. But for Android and without putting the certificates in the sources. It must work with any domain. Rather than not verify the certificate.
However it is possible not to check the certificate.
It was fine to send emails without TSL until it was possible.
Hi Zapta You found it on arduino.org Why you don’t sell PCB of lin module ? I was almost thinking of make and sell them, if possible. Da: Zapta [mailto:[email protected]]...
I'm studying to design a card with LIN. Your Library (And Arduino Library) Work indifferently with UART 0, 1,2 and 3 ? I could put RS232, RS485, and LIN The...