Giovanni

https://github.com/blakadder/zigbee/blob/master/_zigbee/Hexin_DL-20.md In this page pinout of DL-20 is inverted. Another error is VCC label: Vcc on the 4 pin serial port is not the same Vcc on pin 3 of...

License

3

Hi, i would like to ask if there are licences limitations in this firmware use: it would be possible to use it in other self developed boards (eventually also for...

Can not connect to zigbee2mqtt over wifi after changes from 2023

1

Hi, i'm using your component to connect a zigbee coordinator (cc2652p) with zigbee2mqtt over wifi using an esp8266 (esp01-s). After i upgraded to latest version it simpy not connect to...

Hi, i have a ZCS-HYD6.0K-HP. I noticed that all total energy counters except battery energy in/out, stops to collect data at about 18:00 PM. Next day they start to collect...

Hi, I would like to know if three phases configuration is supported by this component. I know that using WatchPower software connected only to L1 inverter in a 3 phase...

Hi i'm totally new to KiCad. Can you briefly explain step by step how to use this script to create JlcPcb libraries? Thank you

Exchaging data between nodes

1

Hi, thank you for your project. It would be possible to exchange data between nodes? My goal would be to send data (voltage, temperature, power etc.) from an esphome node...

Energy consumed counters

19

### Before submitting a new issue - [x ] I [redownloaded the latest release](https://my.home-assistant.io/redirect/hacs_repository/?owner=signalkraft&repository=mypyllant-component) and restarted Home Assistant - [x ] I've checked [known issues](https://signalkraft.com/mypyllant-component/#known-issues) - [ x] I've [enabled...