giedriuslt

Energy counter loses precision after 8.192 kwh

5

Energy for bl0937 is counted ant stored in Wh using float data type (4 bytes). However, it has quite little precision, and after 8192 wh it stops increasing with smallest...

Powersave might not be working on BL602

4

**Describe the bug** Powersave might not be working on BL602 **Firmware:** - Version [e.g. 1.17] - Device: Any - Chip/model: BL602 - Device config: Power save command on BL602 end...

Try to trace where watchdog reboots on bl602

52

Traces all the main loop to serial console to try to catch why bl602 reboots

Add DS18B20 for BL602

14

Tested and working, however I would like to see crc implemented, there is a lot of bad readings

OTA is broken for BL602

7

**Describe the bug** OTA is broken **Firmware:** - Version [e.g. 1.17.638] - Chip/model: BL602 - Device config? **To Reproduce** Steps to reproduce the behavior: Update fails, device crashes, log shows...

This is build for 1mb flash devices, based on previous port to new sdk here #1487

Looks like that parity is set as no parity for cse7766 in rtl8720c while it should be even?