getz53

I would be happy to do this, but since I am new to linux could you tell me how? Do I do something like this? sudo apt update sudo apt...

I have downloaded libgphoto2-2.5.29.tar.bz2 and extracted it to my user directory. (That is, libgphoto2-2.5.29 is now a directory in my user directory.) Also, I have found the libgphoto2 installation instructions...

I fixed the libltdl error using: $ sudo apt install libtool I then ran the following commands. They appear to have run successfully. $ ./configure --prefix=/usr/local $ make $ sudo...

Issue #412 at https://github.com/gphoto/libgphoto2/issues/412 describes a similar problem, and you answered it as follows: "you need to pass --prefix=/usr and --libdir=/correctlibrarydirectory here (the correctlibrarydirectory depends on your distribution)" However, I...

Additional info: My libgphoto2 files appear to be installed in /usr/local/lib $ ls -l total 596 drwxr-xr-x 3 root root 4096 Apr 13 10:34 libgphoto2 -rwxr-xr-x 1 root root 980...

I uninstalled gphoto2 and went through the process compiled the new libgphoto2 again. Now "gphoto2 --version" gives gphoto2 2.5.27 gcc, popt(m), exif, cdk, aa, jpeg, readline libgphoto2 2.5.29 standard camlibs...

My camera is on but is not detected by "gphoto2 --auto-detect". No USB devices are shown by "gphoto2 --list-ports". Devices found: 7 Path Description -------------------------------------------------------------- ptpip: PTP/IP Connection ip: IP...

OK, purged gphoto2 again, installed libusb-1.0-0-dev, installed libusb-dev, ran configure, ran make, ran sudo make install, and installed gphoto2. Now gphoto2 sees USB ports and my camera. I am now...

OK, purged gphoto2 again, installed libusb-1.0-0-dev, installed libusb-dev, ran configure, ran make, ran sudo make install, and installed gphoto2. Now gphoto2 sees USB ports and my camera. I have recreated...

Has any progress been made on this issue? Is there more information that I can provide? Thank you.