geronet1

Hi Michael, ich verwende dein Projekt jetzt dann in 3 Häusern um jeweils 2 Zähler auszulesen. Bei mir daheim hab ich den fork umprogrammiert damit ich den Verbrauchszähler über Modbus...

reading multiple registers at once

1

I wanted to request multiple values from the SDM630 to save time to get a reading interval of 1 second. It works perfect. Reading 20 registers in 100 ms with...

`#if !defined ( WAITING_TURNAROUND_DELAY ) #define WAITING_TURNAROUND_DELAY 500 // time in ms to wait for process current request #endif #if !defined ( RESPONSE_TIMEOUT ) #define RESPONSE_TIMEOUT 10 // time in...

I would like to change the output to Serial1 on an ESP8266, how is this possible? Serial (UART0) is already used for bus communication and i need the hardware UART....

MQTT JSON Payload pro Kanal und total, auswählbar

1

inkl. NodeRED Beispiel Bug #1522 behoben 

CMT Inverter nicht erreichbar [Bug]

12

### Platform ESP32 ### Assembly I did the assebly by myself ### nRF24L01+ Module nRF24L01+ plus ### Antenna external antenna ### Power Stabilization Elko (~100uF) ### Connection picture - [...

Nur 13 Inverter möglich [Bug]

1

### Platform ESP32 ### Assembly I did the assebly by myself ### nRF24L01+ Module nRF24L01+ plus, square dot ### Antenna external antenna ### Power Stabilization Elko (~100uF) ### Connection picture...

Feature Request: HTML Titel änderbar

2

### Platform ESP32 ### Assembly I did the assebly by myself ### nRF24L01+ Module _No response_ ### Antenna circuit board ### Power Stabilization Elko (~100uF) ### Connection picture - [...

Homeassistant discovery ging nicht mit json Ausgabe aktiviert, die IP Adresse stimmte auch nicht.

Homeassistant warning

14

`Entity sensor.watermeter_raw ()` is using state class '`measurement`' which is impossible considering device class ('`water`') it is using; expected `None` or one of '`total`', '`total_increasing`'; Please update your configuration if...